Free shipping on all US order or order above $200
The SucceX-D F7 TwinG // GYRO FUSION is the NEXT-GEN flight controller you need for your build. This FC is ready for anything with 5 uarts, 8 motor outputs, 32Mb blackbox and a powerful F7 processor to run it all. Designed to work seamlessly with DJI’s new HD FPV system. To make things even simpler, the DJI Air unit can just be plugged into the FC with the included wire harness. In addition, we added the popular and reliable USB Type-C instead of Micro USB and therefore the same standard than your DJI module.
• DJI Plug-and-Play - No need to solder tiny wires!
• Gyro Fusion - Zero delay Twin-Gyro filtering!
• Dual BEC 5V and 9V
FC // SucceX-D F7 TwinG
ESC // SucceX 50A 2-6S 4in1
- 8 layers double-sided PCB board
- 3oz 1.4mm thick power board
- 32bit STM32F051 MCU, 48kHz maximum clock speed
- TDK MLCC Low ESR ceramic capacitors
- Top grade NTMFS5C430NL MOSFET
DJI Digital HD FPV Air Unit
Digital HD systems have traditionally been rather bulky and unwieldy to mount on a mini quad. Not anymore. With this air unit, you can comfortably fit the module in your mini quad stack (probably not slammed frames). The 'mini' camera fits easily into your existing builds, no weird mounting adapters.
Note: The Air Unit module does get very hot in use. Do not power on for an extended period of time without proper cooling.Specifications
Weight：Air Unit (Camera included): 45.8 g，3.9 g (MMCX each)
- SucceX-D F7 TwinG Flight Controller × 1
- SucceX 50A 4-in-1 ESC × 1
- DJI FPV Air Unit (with a camera and four M2 screws) × 1
- Three-in-one cable × 1
- Antenna (MMCX) × 2